KBF Series
Manufacturer: BJM Pumps
KBF Series high temperature submersible pump offers heavy duty dewatering and capabilities for light slurry applications including:
• Food waste
• Wash down sumps
• Sand & gravel dewatering
• Barge & tank cleanout
ABRASIVE RESISTANT CHROME IRON COMPONENTS:
• Agitator – to fluidize settled solids into suspension.
• Wear plate – replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
• Semi- open Impeller – to handle some solids.
EVERY KBF PUMP MODEL IS PROTECTED BY:
• Class R motor insulation – and built in amperage ( FLA ) and temperature overload protection.
• Double mechanical seals – SiC/SiC – FKM lower & Carbon Ceramic FKM upper in a separate oil filled seal chamber.
• Heavy Duty Lip Seal – additional protection for the mechanical seals.
• Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
THE KBF SERIES ARE TOP DISCHARGE PUMPS:
• KBF pumps are utility pumps – frequently dragged from one site to another. The KBF doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
• Top discharge pumps are cooled by pumped liquid – The KBF pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
• Top discharge means “SLIM” – even the largest model with a 13.5 inch “waistline” will fit down a manhole with a hose attached. High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
• High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
• Specifications dependent on model & may change without notice.
• Agitator – to fluidize settled solids into suspension.
• Wear plate – replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
• Semi- open Impeller – to handle some solids.
EVERY KBF PUMP MODEL IS PROTECTED BY:
• Class R motor insulation – and built in amperage ( FLA ) and temperature overload protection.
• Double mechanical seals – SiC/SiC – FKM lower & Carbon Ceramic FKM upper in a separate oil filled seal chamber.
• Heavy Duty Lip Seal – additional protection for the mechanical seals.
• Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
THE KBF SERIES ARE TOP DISCHARGE PUMPS:
• KBF pumps are utility pumps – frequently dragged from one site to another. The KBF doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
• Top discharge pumps are cooled by pumped liquid – The KBF pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
• Top discharge means “SLIM” – even the largest model with a 13.5 inch “waistline” will fit down a manhole with a hose attached. High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
• High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
• Specifications dependent on model & may change without notice.